96% of adult fleas are killed by being vacuumed, while 100% of young fleas were killed.. That’s a pretty good success rate!.
The most common culprits for a Miele vacuum losing suction are a clogged filter, overfilled bag, and a blockage somewhere in the hose.In fact, nearly all suction issues can be resolved by removing blockages at these locations.. Related Article:.
A Step-By-Step Guide to Cleaning a Vacuum Cleaner.Brush Roll Isn’t Turning.Miele floorheads with a rotating brush often have a safety mechanism to switch off the belt if there is a blockage..
There is usually an obvious cause of this issue once you take a look into the floorhead.A jam is usually the result of the vacuum sucking up a large item, such as a pet toy, cleaning cloth, or sock.. Make sure you switch off the vacuum and unplug it from the power socket before removing any blockages in the floorhead.
Aside from the risk of electrocution, the brush is likely to start spinning as you remove the blockage, which is a serious risk to your hands.. Once you’ve prepared your vacuum, remove the brush and turn it over.
If there’s something blocking the brush roll, rotate the brush in the opposite direction to untangle it.One of the great things about the Shark AZ910UKT is that it comes with a pet tool.
This tool’s rubber fins are rotated by the vacuum’s suction, to agitate carpet fibres and pick up more hair and dirt.. It’s a shame the tool is suction-powered rather than motorised, as this reduces the power and makes it quite noisy.Still, it’s great to have a rotating brush bar in a smaller tool for cleaning tight spaces, even if you don’t have pets..
Along with the pet tool, the AZ910UKT also comes with an upholstery tool and a 2-in-1 duster crevice tool.The bristles on this tool aren’t too stiff, so it’s more useful for dusting than removing muddy paw prints or stubborn dirt.. All the tools attach onto the wand or directly onto the handle, making them ideal for a range of cleaning tasks around the home.
(Editor: Basic Headphones)